If your audience is spread across a large venue, not everyone will have a clear view of the stage. A presenter’s expression, a performer’s movement or the detail of an award handover can be hard to see from the back or sides of the room.
Multi-camera IMAG helps bring those moments closer. IMAG stands for image magnification: live camera pictures are selected and sent to screens around the venue. Done well, it helps people follow the action without taking them out of the live experience.
For venues, theme parks, festivals and awards shows, the important question isn’t simply whether to put up a camera. It’s how to plan the whole system around the audience, the stage and the show.
What does multi-camera IMAG involve?
A multi-camera IMAG production uses more than one camera to capture a live event. A video operator or director selects between those camera feeds using a switcher. The chosen picture is then sent to one or more screens.
Each camera can offer a different view. One might hold a steady shot of a presenter. Another can follow movement on stage. A third might capture close details or reactions. Switching between them creates a live picture that feels considered, rather than a single, uninterrupted view from the back of the room.
IMAG is different from simply pointing a camera at the stage because the camera positions, shots, screen feeds and timing are planned as part of the event. The aim is to make the stage easier to see while keeping the live action as the focus.

How many cameras do you need?
There isn’t one right number for every production. A smaller awards show with one stage and a seated audience needs a different plan from a festival with several stages and a large crowd.
A useful starting point is to think in terms of camera jobs, not just camera count. For example:
- A main camera can provide a dependable, close view of the host, speaker or lead performer.
- A second camera can offer a different framing, or hold a wider shot while the main camera follows the action.
- An additional angle can bring in movement, performers, instruments or audience reactions.
Some productions also benefit from a fixed camera for a specific, predictable view, such as a lectern or stage entrance. Fixed cameras can add reliable coverage, but they don’t replace an operator who can respond to an unexpected moment.
The right balance depends on the running order, stage layout, audience size and budget. A venue survey helps identify what the audience can see from different sections and where cameras can be positioned without blocking people, performers or crew. In our live video and production services, we plan camera positions around the venue and the sightlines, rather than starting with a standard camera package.
Where should cameras go?
A camera position needs a clear view of the stage and a practical place for the operator and equipment. A camera near the centre of the room often gives a useful, direct view. Other positions can add variety or cover areas that the main camera can’t reach.
But the best location on a plan may not work once you’re in the venue. A camera might obstruct an audience sightline, conflict with scenic elements or be difficult to reach safely. At an outdoor show, cable routes, weather and distance can add further constraints.
Screen locations matter too. If a screen is high, far to one side or visible from several different audience angles, people may experience the picture differently. Camera and screen positions should be considered together, alongside lighting, sound, staging and the audience layout.

Should you use operators or fixed cameras?
It depends on what needs to be captured. An operated camera can respond to a speaker who moves, a performer who changes position or a moment that wasn’t in the running order. It’s a strong choice when the show is varied or relies on live interaction.
A fixed camera has a different role. It can hold a consistent, pre-planned view, such as a wide shot of the stage or a lectern. That can be useful as a safety shot or for a repeated part of the show. The framing still needs to be checked and rehearsed; fixed doesn’t mean “set it up and forget it”.
Some venues and events use a mix. The production plan should make clear what each camera is there to capture and who is responsible for operating it. That makes it easier for the video team to cover the show without unnecessary shots or confusion at a key moment.
How big should the screens be, and where should they sit?
Screen size and placement depend on the venue, audience distance, viewing angles and content. The goal is for people in the furthest seats to make out the faces and action that matter, not just to see a bright rectangle at the front of the room.
Walk the venue and check views from the back, sides and any areas where pillars, balconies or scenery could obstruct the picture. Consider whether one screen is enough, or whether side screens are needed to serve people seated at an angle. For outdoor events, daylight and weather also affect the screen choice and position.
Plan screens early. Treating them as an afterthought can leave cameras with poor angles, audience areas without a clear view, or structures and equipment placed where they disrupt the event. This is one reason screen, staging, lighting and camera decisions benefit from being coordinated at the design stage.
What should we check about latency?
Latency is the delay between something happening on stage and appearing on the screen. If that delay is noticeable, the audience may see a performer’s movement on screen after they’ve already seen it happen live.
Delay can build up as a signal travels through camera systems, switching equipment and screen processors. It’s worth discussing the entire signal route with your production team, not just the camera or switcher. At rehearsal, check the picture on the actual screens from relevant parts of the venue. If audio and video are routed separately, check that they still feel in sync.
The specific setup will vary by venue and equipment. The practical point is simple: test the whole chain before the audience arrives.
How does IMAG fit with an in-house AV team?
Your venue may already have technicians, screens, cabling or control systems. An external production team can work alongside them, provided roles and responsibilities are agreed early.
Start by sharing technical information and agreeing who will provide each part of the system: cameras, switching, screen feeds, signal connections and on-site operation. Confirm who makes changes during the show and who the teams should contact if an issue comes up.
At Valcato, we can provide the full production or work alongside an existing venue team and suppliers. We own our camera and switching kit, so we know what we’ve prepared for the job. We also test content and rigs in our studio before show day, then coordinate video with lighting, sound and staging through one crew.
That joined-up planning is particularly useful when a change to the running order affects more than one department. It reflects the approach behind the Valcato Method: understand the event, design the production, prepare it, deliver it and learn from the result.
What are the common pitfalls?
A few avoidable issues can make IMAG less useful for the audience:
- Choosing positions without checking sightlines. A camera or screen can block the view it’s meant to improve.
- Using too few camera options for the show. One static angle may not suit a moving performance or a fast awards sequence.
- Switching without a clear purpose. Frequent cuts can distract people instead of helping them follow the action.
- Leaving screen decisions too late. Screen placement, size and camera angles need to work together.
- Skipping a full system test. Check cameras, switching, signal routes and screens in the venue, not just on a control monitor.
A clear camera plan and rehearsal help the production team catch these issues while there’s time to address them. If you’re comparing suppliers, our guide on how to choose a technical production partner includes practical questions to ask about venue planning, responsibilities and preparation.
Make the picture serve the live event
The best IMAG plan is shaped around the show and the people watching it. It gives the audience a clear view of important moments, while camera positions and screen feeds work with the venue rather than against it.
If you’re planning a production and weighing up cameras, screens or how to work with an in-house team, talk to Valcato. We’re happy to hear what you have in mind and help you explore the practical options.